For hobbyists, a simple solution when uncapping frames. The top 2 tanks have a mesh base to strain the cappings, while the bottom tank stores the honey.

A spare chain link is always handy to have on hand. Allows you to get back to production quickly.

Stand and Draining Tray only.

These Stands are only made to order.

Uncapping machine not included.

Uncapping tubs not included.

We can manufacture Stainless Steel stands to any length with drip trays, or with a cappings hopper.

This machine is the same as the standard Uncapper except it has all Stainless steel chain and stainless steel sprockets. A proven design, developed over 25 years of working in the industry. They comprise S/S serrated blades, steam heated, and driven in an oscillating pattern by the electric motor. 

These Machines are only made to order.

A proven design, developed over 25 years of working in the industry. They comprise S/S serrated blades, steam heated, and driven in an oscillating pattern by the electric motor. .

These Machines are only made to order.

A standard, lightweight 10 inch steam knife for uncapping combs of honey. This knife requires a unit to make steam - most people use an old pressure cooker to boil water on a gas burner.

This electrically heated 240 volt knife is the most convenient solution for uncapping frames of honeycomb.  

The knives are calibrated to run around 290 °F. (143°C).

During initial preheating period knives will reach a higher temperature until it reaches its equilibrium.  

Knives are not designed to adjust in the field and we do not recommend any adjustments. However if adjustment is required please call us for assistance.

Lowest temperature I would recommend is 250 °F. (121°C)

Highest 330°F. (165°C).  At high temperature uncapping has to be done fast.  Otherwise honey will start to burn.

A woven  belt, with a 240V heating element and adjustable control , clamps to the outside of a 44 gal (200 Ltr) drum. This product is designed to melt candied honey in a drum.

Designed to lift 200 Ltr (44 gallon) drums of honey. Engineered for the purpose and safety tested, this unit lets you safely handle full drums of honey.

 This full depth plastic frame feeder has internal ribs and holds approximately 4 litres.

Note: Takes up the space of 2 standard frames